HEATING MAINTENANCE & SAFETY INSPECTION INCLUDES:
1.  INSPECT AND CLEAN HEAT EXCHANGER
2.  INSPECT, CLEAN, AND ADJUST BURNERS
3.  CLEAN AND ADJUST PILOT AND/OR FLAME SENSORS
4.  CHECK AND TEST SAFETY SWITCHES AND LIMITS
5.  CHECK THERMOSTAT AND CALIBRATE IF NEEDED
6.  INSPECT BLOWER, CLEAN IF NEEDED, AND OIL BLOWER MOTOR
7.  REPLACE OR CLEAN FILTERS
8.  THOROUGHLY CHECK HEAT PUMPS; TEST DEFROST, CLEAN OUTDOOR COIL, IF NEEDED, CHECK 
     REFRIGERANT PRESSURES
9.  VERIFY PROPER AIR FLOW
10. MAKE CERTAIN HEATING SYSTEM IS OPERATING SAFELY AND EFFICIENTLY

SPRING MAINTENANCE SPECIAL INCLUDES: 
1. THOROUGHLY CLEAN AND CHECK CONDENSER UNIT AND COIL
2. REPLACE OR CLEAN ALL STANDARD FILTERS
3. CHECK REFRIGERANT PRESSURES
4. INSPECT INDOOR EVAPORATOR COIL AND DRAIN PAN
5. CLEAR OUT AND INSPECT DRAIN LINE
6. CHECK AND LUBRICATE ALL FAN AND BLOWER MOTORS
7. INSPECT ALL ELECTRICAL CONNECTIONS
8. CLEAN BLOWER ASSEMBLY AS NEEDED
9. CHECK ALL SAFETY SWITCHES AND CONTROLS
10. CHECK THERMOSTAT AND CALIBRATE IF NEEDED
11. INSPECT AND TEST ALL CAPACITORS AND CONTACTORS
12. MAKE SURE SYSTEM IS OPERATING AT FULL CAPACITY